ISEL-software

Steuerungssoftware, CAM, 2D/3D CAD, G-Code Editoren
Antworten
Valentin
Beiträge: 3
Registriert: 20.01.2020, 08:23

ISEL-software

Beitrag von Valentin » 20.01.2020, 08:36

Hallo alle,

Ich habe eine alte ISEL GFV-Maschine mit servo UPMV 4/12-Controller und UVE 8012-Leistungsstufen, mit alter Software für MS-DOS, Remote über ISELDRV.EXE.

Hat jemand die Windows-Version von Remote für UPMV 4/12? ISEL bietet es nicht mehr an, ich habe sie gefragt und die aktuelle Version von Remote ausprobiert: hat kein UPMV 4/12 mehr.

Vielen Dank,
Alles Gute,
Valentin

original message is in English, I used Google translate:

Hello all,

I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.

Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.

Thank you,
All the best,
Valentin

Elses
Beiträge: 198
Registriert: 17.12.2018, 08:56

Re: ISEL-software

Beitrag von Elses » 21.01.2020, 10:53

Galaad, hier KAY ist sehr viel besser.
Steuerung wählen, Parameter sind hinterlegt und gut ist.
Mit dem richtigen Kabel funktioniert dies auch prima via USB.

MfG Stephan

Valentin
Beiträge: 3
Registriert: 20.01.2020, 08:23

Re: ISEL-software

Beitrag von Valentin » 22.01.2020, 08:47

Hallo,

Vielen Dank für Ihre Antwort!

Sind Sie sicher, dass Galaad mit UPMV 4/12 arbeitet? Laut dieser Diskussion ist dies nicht der Fall, oder es wird MCTL_UPMV4.DLL benötigt, das aus der alten Windows-Version (en) von Remote stammt, die ich nicht habe.

https://www.cnczone.com/forums/general- ... tware.html

Alles Gute,
Valentin




original message is in English:

Hello,

Thank you for your answer!

Are you sure that Galaad is working with UPMV 4/12? Because, according to this discussion, it doesn't, or it needs MCTL_UPMV4.DLL, which comes from the old Windows version(s) of Remote, which I don't have.

https://www.cnczone.com/forums/general- ... tware.html

All the best,
Valentin

Elses
Beiträge: 198
Registriert: 17.12.2018, 08:56

Re: ISEL-software

Beitrag von Elses » 24.01.2020, 07:43

Ganz einfach...

http://www.galaad.net/machines-deu.html

Anschreiben und fragen.
Ich denke es funktioniert, bin mir aber nicht wirklich sicher.
Irgendwo auf der Seite stehen die Steuerungen von Isel die unterstützt werden.

"ISEL-AUTOMATION Alle Maschinen mit Steuerung C10, C142, CSD315, CSD405iMC, CSI464iML, IT108,
IT116, iMC4, iMS6, IML4, iMC/M, iMC/MP, iMC1, mini EP-1090, Compact iMS6, series CPM, ICP, ICV, CPV,
GPV, GFM, GFS, FlatCom, EuroMold, MiniMod, MiniFlat, ModuFlat"

Also wohl eher nicht...fragen!

Regards Stephan

Valentin
Beiträge: 3
Registriert: 20.01.2020, 08:23

Re: ISEL-software

Beitrag von Valentin » 30.01.2020, 07:54

Hallo,

Ich fragte sie und bekam diese Antwort:

> Lieber Valentin
>
> Ja, Galaad treibt den Isel UPMV4-12 an, aber dies ist etwas schwierig einzurichten.
> Sie müssen WinRemote installiert haben, damit Galaad nach DLL- und INI-Dateien suchen kann.
>
> Mit freundlichen Grüßen
> XXXXXXXXXX

WinRemote für UPMV 4-12 (MCTL_UPMV4.DLL) ist genau das, wonach ich suche ...

Alles Gute,
Valentin



orig msg is in english:

Hello,

I asked them, and got this answer:

> Dear Valentin
>
>Yes Galaad drives the Isel UPMV4-12, but this is a bit tricky to setup.
>You must have WinRemote installed and then Galaad can search for the DLL and INI files.
>
>Best regards
>XXXXXXXXXX

WinRemote for UPMV 4-12 (MCTL_UPMV4.DLL) is the exact thing I'm looking for...

All the best,
Valentin

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 22 Gäste